GPS Fleet Tracking Solutions

Small and large fleets

The 6150 is a cost-effective GPS tracking beacon designed for fleet management needs in local delivery and service fleets, mass transportation, utility vans and construction vehicles. The 6150 has a robust set of features including real time and scheduled tracking, plus zone and speed monitoring, a back-up battery and power-cut notification.

Combined with our commercial mobile monitoring portal, subscribers can manage and view the location of any or all vehicles in a fleet, run a variety of valuable reports, and even manage vehicle maintenance alerts. Optional support for the Garmin™ Fleet Management protocol allows you to communicate with a driver using an in-vehicle personal navigation device. Security features include vehicle theft detection and tracking.

Specifications

• Location Technology
• Connector: FAKRA
• Antenna: 3.3V active
• GPS Protocols: NMEA, TAIP, Binary

Wireless

• Network: GSM/GPRS
• Frequencies:
• 850/900/1800/1900 MHz

Antennas

• Combined GPS/GSM: External

Power source:

• Voltage range: 9 to 30 VDC
• Primary source: Vehicle battery
• Secondary source: Backup battery

Current draw:

• Maximum surge: 2.1 A
• Transmit: 250 mA
• Stand-by: 45 mA

Mechanical/Environmental

• Operating temperature range:
• -22 to +185°F (-30 to +85°C)

Storage:

• -40 to +185°F (-40 to +85°C)
•  Humidity: up to 95% non-condensing
• Vibration: Compliant with SAE J1211
• Size: 3.4 x 2.4 x 1 inches
• (86.4 x 61 x 25.6 mm)
• Housing: Rugged plastic enclosure

Applications of Mobile Monitoring

• Improve productivity of mobile staff
• Improve customer service
• Prevent misuse of company resources
• During and after work hours
• Recover stolen or misplaced vehicles
• Provide monitored security for drivers

Mobile Monitoring for:

• Delivery/courier fleets
• Contractors/installers
• Utility companies
• Emergency response organizations
• Government
•  Outside sales personnel
• Leased/rental vehicle companies

Be alerted of temperature changes of cargo above or below set temperatures

An equipment failure or operator error can be very costly when dealing with temperature controlled cargo. A truckload of spoiled food or medicine can cost thousands when not transported in the proper environment. Don’t risk your company’s reputation, play it safe and know the temperature of your cargo at every step of the way!

Have Movin’ On GPS install a temperature sensor in your cargo area, and be notified instantly of a potential problem. Know the current temperature and location of the vehicle. Imagine having temperature data on all your vehicles in the palm of your hands! At its current cost, you can’t afford NOT to have this technology!

Works with our GPS tracking system

Enjoy all of the great reporting features of our GPS tracking portal, which tell you when, where, and how long each and every stop was. Combine this with our new cargo monitoring feature, and you will also know that your cargo is being delivered to your customer at the proper temperature.

Set temperature thresholds

Set thresholds so that you may be notified when the temperature exceeds a set number. Get notifications by text or by email.

Run Reports

Get valuable data about temperature changes for a set time. Event detail reports will show you when and where a temperature threshold was exceeded.

Identify your personnel with RFID technology

When you have multiple people sharing or swapping vehicles, your tracking system is only giving you part of the story. RFID tags can help you with time tracking, accountability, and team management in real time.

The iButton® system

Every employee gets a unique identification code, embedded in a small and convenient iButton. After starting the vehicle, the employee will be prompted to insert their iButton. If not, a buzzer will sound.

Everything built into one system

Our GPS tracking systems seamlessly integrates* with the RFID tag, so you can run your usual reports that tell you what vehicle was going where, when, but now you also know who was driving.

Flexible Installation

The iButton receiver is built to mount flush to a variety of dashboards. Movin’ On will install your RFID system so that it’s easy to use and access, just like it was part of the vehicle.

Self installation through OBDII port, and easily transferable to other vehicles

The MOSS-OBDII-GPS tracking system requires very little technical knowledge to install. The unit connects to your vehicle’s OBDII port, which is an easily accessible socket located under the dashboard. With powerful GPS technology and cellular triangulation, the MOSS-OBDII-GPS works in a variety of commercial and private vehicles in challenging conditions.

Because the MOSS-OBDII-GPS can be installed in minutes, it has a number of advantages:

• Easily transferable to different fleet vehicles
• One unit can be used to track a variety of vehicles at different times
• Manage sales force using non-company vehicles
• Use as a temporary tracking system
• Lower cost alternative to permanent tracking systems
• Great solution for leased or rented vehicles

Powerful features, small package

Although the MOSS-OBDII-GPS does not offer PTO monitoring and output triggering capabilities, it has all of the reporting and tracking abilities of its permanently installed counterparts. The MOSS-OBDII-GPS can be configured to send you text message and email alerts when your vehicles engage in excessive speeding, lengthy idling, after hours usage, and zone exiting. Choose from over 20 other reports to help manage your fleet and increase efficiency. If a more covert installation is needed, or if you need to monitor machinery and PTO’s, please see our installed GPS tracking systems.

What is an OBDII connector?

Mechanics will use your OBDII connector to plug diagnostic equipment into your car. Because of this, the OBDII connector is designed to be accessed easily. The MOSS-OBDII-GPS capitalizes on this easily accessible connector to provide you with a convenient method of installing and removing your GPS tracking system. If the port is needed for vehicle diagnostics, the mechanic must simply unplug the MOSS-OBDII-GPS, and reconnect it when finished servicing the vehicle.

How to find your OBDII Connector

Start by looking around the underside of your dashboard, below your steering wheel but above your gas and brake pedals. The diagram below will show you the general area to search.

Installing the MOSS-OBDII-GPS

Once the OBDII connector has been located, all that is required is to plug the MOSS-OBDII-GPS into the connector. Once you turn the ignition of the vehicle on, the small lights on the unit will blink.  During your first installation, you will need to give the MOSS-OBDII-GPS unit a minimum of 15 minutes fully initialize.

Other Applications

Because of its simplicity, the MOSS-OBDII-GPS can be used for applications other than commercial fleet vehicles.

• Teen drivers and new drivers
• Track Family members for safety purposes
• Use as a vehicle recovery system similar to LoJack

Smarter Dispatching with Garmin™

Garmin™ Navigation provides dispatchers and fleet managers with the ability to communicate with drivers through a Garmin Personal Navigation Device (PND) installed in the vehicle. Dispatchers may choose destinations for their fleet vehicles, and send those destinations electronically (along with a description of the Job and instructions) to the vehicle’s PNDs. Drivers can then use the PNDs for turn-by-turn directions to the destination. The job’s status is instantly available to the dispatcher in a simple map-based interface. Dispatchers and drivers may also exchange messages easily and safely using the Garmin PNDs.

Eliminate discrepancies

• No need for driver to “write it down” in transit
• Save time
• Increase accuracy of information
• Keep records of job completion and time
• Re-route drivers effectively
• Enjoy the benefits of Garmin navigation
• Garmin navigation speaks many languages

The MOSS 2800 is a high-performance beacon designed for commercial trailers which are typically tethered to 12V and 24V vehicle systems. Trailers may now be tracked as independent vehicles in the GPS Portal, regardless of whether they are tethered to a tractor. The device transmits location data using the latest 3G HSPA (high speed packet access) network technology for fast and error-free data communication.

This fully weather-proofed device has a powerful internal battery that will

power the device for more than one month while the trailer is untethered,

providing periodic location data.

• Real-time Location and Reporting
• Single point locale - Pinpoint the trailer’s current location
• Scenario tracking - Provides periodic location to assist in trailer recovery
• Route logs - Archive records of trailer movements
• Power cut notification - Receive notifications when the trailer is untethered from the tractor
• Low battery notification - Receive notifications when the internal battery of the device requires charging

Long-term Trailer Management

The MOSS 2800 is designed to provide reliable location data even though the trailer may be untethered from a power source for an extended period.

The device conserves its internal battery by entering a “deep sleep” mode when the trailer is untethered. The device will wake up on a schedule set by the tracking scenario, transmit its current location to the GPS Portal, then re-enter sleep mode.

When the trailer is reconnected to a power source, the MOSS 2800’s internal battery will fully recharge in 2-3 hours.

Tracking may be enabled at a frequency of up to 4 locates per day, every 6 hours from a start time set by the user. The interval may be set to every 12 hours, or once every 24 hours to maximize battery life.

The Safeguard Companion is a personal GPS tracking system that runs on battery power. The system can be used to track workers, assets, or even vehicles via a variety of settings including GEO-fencing and speeding alarms.

Applications

• AGPS – (Assisted GPS) allow 3 second accurate locations in buildings, urban canyons and difficult reception areas.
• SOS Emergency Button – Connects to a 24X7 emergency response center
• Specialized Applications – Two additional buttons for additional requirements
• Easy to Use – Computer system allows remote programming of all internal features and functions!
• Quad Band – Operates World Wide
• Emergency Alarm Notification – Text messages or email to multiple people
• Use any Computer – Browser based – Use any computer to receive time specific location and status reports.

Features

Locate & Track:

On-demand Locate requests can be made from any Internet enabled computer. Automatic Tracking can be programmed online and changed as needed.

Two Way Voice (two options):

Device wakes up, locates by GPS, Transmits location, Resumes sleep mode.

Standard Voice service provides complete location based services, Emergency and Concierge services such as directions to banks, hotel, restaurants, gas stations, roadside assistance etc…

SOS Emergency Button:

Recessed Emergency SOS Button connects to the 24X7, Live Operator Emergency Response Center, displaying the emergency location alarm icon on the map at the current location, then automatically notifies (3) pre-programmed Cell Phones, additionally sends an alarm notice to pre-programmed e-mail addresses.

Speeding Alarm :

A maximum speed limit can be set by the owner, from any computer. Speeding Alarms are displayed on the map and saved by the server to be displayed on the tracking history report.

Geo-Fence Alarm:

Up to 5 user-defined geographic areas, or Geo-Fence boundaries, can be programmed through any computer. The Geo-Fence Alarm notifies (3) pre-programmed Cell Phones and E-mail Addresses when the device Enters or Leaves one of the designated Geo-Fences..

Anti-Theft Alarm:

A 100-foot current location Geo-Fence can be created with the programmed Button on the Safeguard Companion. This triggers a Text Message Notification if the Device is moved more than 100 Ft to all pre-programmed Cell Phones, and all pre-programmed E-mail addresses.

Low Battery Alarm:

Low Battery Alarm notifies the 24X7, Live Operator Emergency Response Center, sends a Text Message to (3) pre-programmed Cell Phones, sends an alarm notice to the pre-programmed e-mail addresses and provides a location on the map.

Our Reliable Infrastructure, your specialized software

Although the majority of our clients use our robust tracking portal for fleet management, many unique sectors require custom software specific to their industry. To integrate our tracking system with the countless applications that fleet managers use, we make available an application programming interface (API) to all MovinOnGPS customers. Many business on Long Island and New York are already using our API to enhance their operations.

With XML output and a comprehensive data dictionary available upon request, developers have access to virtually all the data our system collects and stores. Unlock the true power of MovinOnGPS with data exchange.

MORE THAN THE MANDATE

There are a lot of options available that will meet the FMCSA Electronic Logging Device (ELD) mandate. MovinOnGPS

offers a complete fleet management solution that goes beyond the basics, and offers a rich feature set to increase visibility into your systems, streamline your operations, and increase your revenue.

ELDs

Certified to comply to FMCSA ELD mandate

Multiple rule sets available

Integrally synched to ECM

DVIR

Electronic pre- and post-trip inspections

Add notes and comments

Monitor logs and inspections online

IFTA

Automatically calculate fuel tax, mile tax, IRP

Track fuel purchases

Generate fleet-wide mileage reports

GPS

See truck locations in real-time

View Diagnostic Trouble Codes (DTC)

Generate route logs and driver behavior scorecards

REDUCE PAPERWORK, IMPROVE EFFICIENCY

MovinOnGPS offers fleet management solutions for heavy duty vehicles and is designed for reliable, long term deployments in trucks, trailers, and other assets. Electronically complete and submit RODS and DVIRs, reducing amount of time spent on paperwork. Reduce fuel consumption through idle and speed management.